Potential of a deep eutectic solvent in silver nanoparticle fabrication for antibiotic residue detection

• Le Hong Tho,
• Bui Xuan Khuyen,
• Ngoc Xuan Dat Mai and
• Nhu Hoa Thi Tran

Beilstein J. Nanotechnol. 2024, 15, 426–434, doi:10.3762/bjnano.15.38

• In this study, we have proposed a novel strategy for Ag NP synthesis in a DES composed of ᴅ-glucose, glycerol, and urea. The Ag NPs-DES sample was prepared successfully through chemical reduction, in which DES acts as solvent and shape-controlling agent. Using NFT and SDZ as probe molecules, the SERS

New application of bimetallic Ag/Pt nanoplates in a colorimetric biosensor for specific detection of E. coli in water

• Azam Bagheri Pebdeni,
• Mohammad N. AL-Baiati and
• Morteza Hosseini

Beilstein J. Nanotechnol. 2024, 15, 95–103, doi:10.3762/bjnano.15.9

• /Pt NPLs A modified chemical reduction method was used to create Ag NPLs [26][38]. The aqueous solution synthesis of Ag-Pt NPL is described below. To begin, 50 L of 0.05 M AgNO3 aqueous solution was mixed with 10 mL of 2.5 × 10−4 M sodium citrate aqueous solution. After that, 25 µL of 0.1 M ascorbic

In situ magnesiothermic reduction synthesis of a Ge@C composite for high-performance lithium-ion batterie anodes

• Ha Tran Huu,
• Ngoc Phi Nguyen,
• Vuong Hoang Ngo,
• Huy Hoang Luc,
• Minh Kha Le,
• Minh Thu Nguyen,
• My Loan Phung Le,
• Hye Rim Kim,
• In Young Kim,
• Sung Jin Kim,
• Van Man Tran and
• Vien Vo

Beilstein J. Nanotechnol. 2023, 14, 751–761, doi:10.3762/bjnano.14.62

• preparation routes, such as sputtering deposition [20], wet-chemical reduction [21][22], thermal reduction [23], colloidal synthesis [24], and molten-salt synthesis [25], metallothermic, especially magnesiothermic reduction, has been widely applied in the synthesis of group-IV elements to control the

New trends in nanobiotechnology

• Pau-Loke Show,
• Kit Wayne Chew,
• Wee-Jun Ong,
• Sunita Varjani and
• Joon Ching Juan

Beilstein J. Nanotechnol. 2023, 14, 377–379, doi:10.3762/bjnano.14.32

• -assembly; wet chemical reduction; The widespread use of nanotechnology has reached almost every sector in our daily lives and amazed the world by offering various potential applications in these sectors. The uprising wave of nanotechnology and its application are now prominent in the fields of chemistry

• morphology, yield and monodispersity. The introduction of a deep eutectic solvent as a cost-effective and green solvent was reviewed, where the usage of these solvents enabled the extraction and formation of desired nanostructures. The work also records the advantages and disadvantages of wet chemical

• reduction methods which use surfactants, and explores the in vitro and in vivo cytotoxicity of the synthesized anisotropic nanoparticles. A portion of the work looks into the possible integration of nanotechnology in deep eutectic solvent extractions and also the use of carrageenan as a safe stabilizing

Antimicrobial and mechanical properties of functionalized textile by nanoarchitectured photoinduced Ag@polymer coating

• Jessica Plé,
• Marine Dabert,
• Helene Lecoq,
• Sophie Hellé,
• Lydie Ploux and
• Lavinia Balan

Beilstein J. Nanotechnol. 2023, 14, 95–109, doi:10.3762/bjnano.14.11

• difficult to implement and tend to cause NP self-aggregation. In situ methods are therefore generally preferred and typically require the polymer film surface to be treated with a metal precursor solution (layer-by-layer [37][38], sol–gel [39]) before undergoing thermal [40] or chemical reduction reactions

• coupling between the in situ chemical reduction of metallic precursors and photopolymerization of acrylic monomers ensures a depth-wise MNP distribution inside the cross-linked network, which prevents possible leaching processes. Based on these results, we investigated the antimicrobial properties (liquid

Reliable fabrication of transparent conducting films by cascade centrifugation and Langmuir–Blodgett deposition of electrochemically exfoliated graphene

• Teodora Vićentić,
• Stevan Andrić,
• Vladimir Rajić and
• Marko Spasenović

Beilstein J. Nanotechnol. 2022, 13, 666–674, doi:10.3762/bjnano.13.58

• ) [3][4][5][6][7], epitaxial growth on different substrates [8][9], and the chemical reduction of graphene oxide (GO) [10][11]. In 2008, production of graphene by liquid-phase exfoliation (LPE) of graphite through sonication of graphite powder in N-methylpyrrolidone (NMP) was first proposed by Coleman

Zinc oxide nanostructures for fluorescence and Raman signal enhancement: a review

• Ioana Marica,
• Fran Nekvapil,
• Maria Ștefan,
• Cosmin Farcău and
• Alexandra Falamaș

Beilstein J. Nanotechnol. 2022, 13, 472–490, doi:10.3762/bjnano.13.40

• metal NPs with ZnO. Au–ZnO core–shell NPs were obtained by preparing first AuNPs by chemical reduction and then fabricating Au–ZnO NPs by a seed growth method [51][54]. A higher enhancement in the Raman signal of p-aminothiophenol molecules was obtained using the Au–ZnO NPs compared to using Au NPs

• –shell metal–ZnO nanocomposites have shown new exciting properties and even metal-enhanced fluorescence for dyes mixed with the NPs. [20] demonstrated MEF for Ag–ZnO using rhodamine 6G (R6G), prepared through a simple chemical reduction method and deposition of the nanoscale ZnO layer on the surface of

Tin dioxide nanomaterial-based photocatalysts for nitrogen oxide oxidation: a review

• Viet Van Pham,
• Hong-Huy Tran,
• Thao Kim Truong and
• Thi Minh Cao

Beilstein J. Nanotechnol. 2022, 13, 96–113, doi:10.3762/bjnano.13.7

• in recent years. There are many methods for controlling and removing NOx, such as reducing the burning temperature, reducing the residence time at peak temperature, chemical reduction or oxidation of NOx, removal of nitrogen from combustion fuels, and sorption, both adsorption and absorption [7][8

Sputtering onto liquids: a critical review

• Anastasiya Sergievskaya,
• Adrien Chauvin and
• Stephanos Konstantinidis

Beilstein J. Nanotechnol. 2022, 13, 10–53, doi:10.3762/bjnano.13.2

The role of deep eutectic solvents and carrageenan in synthesizing biocompatible anisotropic metal nanoparticles

• Nabojit Das,
• Akash Kumar and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2021, 12, 924–938, doi:10.3762/bjnano.12.69

• creating a nontoxic platform for synthesizing nanomaterials with the potential for biological applications. Wet chemical reduction method using surfactants: pros and cons The widely used wet chemical approach for synthesizing nanomaterials is a facile reduction method involving a precursor metal salt and a

Surface-enhanced Raman scattering of water in aqueous dispersions of silver nanoparticles

• Paulina Filipczak,
• Krzysztof Hałagan,
• Jacek Ulański and
• Marcin Kozanecki

Beilstein J. Nanotechnol. 2021, 12, 497–506, doi:10.3762/bjnano.12.40

• synthesized via simple chemical reduction of silver nitrate with sodium borohydride [36]. The volume added of potassium bromide during the synthesis was crucial for the size control of AgNPs. The sample without added KBr turned blue and the ample with 40 µL of the added KBr turned yellow. The synthesized

A review on the green and sustainable synthesis of silver nanoparticles and one-dimensional silver nanostructures

• Sina Kaabipour and
• Shohreh Hemmati

Beilstein J. Nanotechnol. 2021, 12, 102–136, doi:10.3762/bjnano.12.9

• processes [143][144][145][146], conventional chemical reduction [147][148][149][150][151], reverse micelle [152][153][154], co-precipitation [155], chemical vapor deposition [156][157][158], solvothermal [159][160][161], and electrochemical reduction [162][163][164][165]. Chemical synthesis methods are

• synthesis Chemical reduction, or conventional chemical synthesis, is the most common approach for the synthesis of AgNPs [214]. This is performed by the presence of a metal precursor such as AgNO3, a reducing agent such as hydrazine, sodium borohydride, ethylene glycol, or dimethylformamide (DMF) as well as

• size distribution and morphology [241]. The disadvantages of this method are associated with the high process cost, complexity, and low scale-up capability [158]. 2.2.4 Wet chemical synthesis. Currently, most synthesis methods still rely on wet chemical reduction using a chemical reducing agent. The

Antimicrobial metal-based nanoparticles: a review on their synthesis, types and antimicrobial action

• Matías Guerrero Correa,
• Fernanda B. Martínez,
• Cristian Patiño Vidal,
• Camilo Streitt,
• Juan Escrig and
• Carol Lopez de Dicastillo

Beilstein J. Nanotechnol. 2020, 11, 1450–1469, doi:10.3762/bjnano.11.129

• conditions, the size, length, and diameter of the nanostructures can be adjusted in order to control the physical properties of the NPs. Chemical methods A few examples of chemical methods that have been used to synthesize nanoparticles are the atomic layer deposition method, chemical reduction method

• diameters ranging between 80 and 180 nm and length values that can reach several tens of micrometers. The chemical reduction method was initially proposed by Michael Faraday in 1856–1857 while investigating the properties of colloidal gold. This method generally uses a precursor, a reducing agent, and a

Simple synthesis of nanosheets of rGO and nitrogenated rGO

• Pallellappa Chithaiah,
• Madhan Mohan Raju,
• Giridhar U. Kulkarni and
• C. N. R. Rao

Beilstein J. Nanotechnol. 2020, 11, 68–75, doi:10.3762/bjnano.11.7

• ], solvothermal [16], hydrothermal synthesis [17], laser reduction of graphite oxide [18][19], and photo thermal deoxygenation of graphene oxide by camera flash have been developed to reduce the oxygen content of GO in order to restore the conjugated network [20]. Recently, a well-known chemical reduction method

Ternary nanocomposites of reduced graphene oxide, polyaniline and hexaniobate: hierarchical architecture and high polaron formation

• Claudio H. B. Silva,
• Maria Iliut,
• Christopher Muryn,
• Christian Berger,
• Zachary Coldrick,
• Vera R. L. Constantino,
• Marcia L. A. Temperini and
• Aravind Vijayaraghavan

Beilstein J. Nanotechnol. 2018, 9, 2936–2946, doi:10.3762/bjnano.9.272

• hexagonal carbon lattice (removal of functional groups) may be required and this process is performed by thermal or chemical reduction of GO, resulting in reduced graphene oxide (rGO) in which some of the properties of graphene are almost recovered, such as mechanical resistance and thermal and electrical

• sonication (less than 10 μm) [34][35][42][43][44][67]. Reduced graphene oxide was prepared by chemical reduction of GO in 0.25 mg·mL−1 dispersions with hydrazine and ammonia solution at 25 °C for 7 days. The resulting rGO dispersion presents suitable stability for the preparation of the nanocomposites. This

Synthesis of rare-earth metal and rare-earth metal-fluoride nanoparticles in ionic liquids and propylene carbonate

• Marvin Siebels,
• Lukas Mai,
• Laura Schmolke,
• Kai Schütte,
• Juri Barthel,
• Junpei Yue,
• Jörg Thomas,
• Bernd M. Smarsly,
• Anjana Devi,
• Roland A. Fischer and
• Christoph Janiak

Beilstein J. Nanotechnol. 2018, 9, 1881–1894, doi:10.3762/bjnano.9.180

• rare-earth metal ions (typically below −2.0 V vs NHE) cause much difficulties regarding the chemical reduction of any chosen precursor and the prevention of post-synthesis oxidation or contamination of the RE-NPs. Recently, Alivisatos and co-authors reported on the synthesis of Pt3Y and other so-called

A visible-light-controlled platform for prolonged drug release based on Ag-doped TiO₂ nanotubes with a hydrophobic layer

• Caihong Liang,
• Jiang Wen and
• Xiaoming Liao

Beilstein J. Nanotechnol. 2018, 9, 1793–1801, doi:10.3762/bjnano.9.170

• air atmosphere to form anatase phase. Decoration with Ag nanoparticles Chemical reduction was applied to decorate the nanotubes with Ag nanoparticles (AgNPs). The annealed TNTs were soaked in 4 mL 200 mM AgNO3 for 50 min in darkness and then dipped in 6 mL 5 mM NaBH4 for another 50 min. The resulting

Cr(VI) remediation from aqueous environment through modified-TiO₂-mediated photocatalytic reduction

• Rashmi Acharya,
• Brundabana Naik and
• Kulamani Parida

Beilstein J. Nanotechnol. 2018, 9, 1448–1470, doi:10.3762/bjnano.9.137

• industrial processes pose threat to aquatic life and downstream users. Various treatment techniques, such as chemical reduction, ion exchange, bacterial degradation, adsorption and photocatalysis, have been exploited for remediation of Cr(VI) from wastewater. Among these, photocatalysis has recently gained

• pollutants and has mandated a maximum acceptable concentration of 50 μg L−1 in potable water [13][14][15]. Therefore, it is now of great importance to explore the efficient and economical ways for the treatment of Cr(VI)-rich wastewater. Various techniques, such as chemical reduction, ion exchange, bacterial

• degradation and adsorption, have been exploited to treat Cr(VI) [16][17][18][19]. Among these technologies, chemical reduction has extensively been investigated because it involves conversion of toxic Cr(VI) species to less toxic Cr(III) ions, which are precipitated as green precipitates of Cr(OH)3 in neutral

Electrostatic force spectroscopy revealing the degree of reduction of individual graphene oxide sheets

• Yue Shen,
• Ying Wang,
• Yuan Zhou,
• Chunxi Hai,
• Jun Hu and
• Yi Zhang

Beilstein J. Nanotechnol. 2018, 9, 1146–1155, doi:10.3762/bjnano.9.106

• reduced GO sheets for examples, we aim to evaluate the degree of reduction of individual rGO sheets at the nanoscale using EFS. Results and Discussion The thermal or chemical reduction of GO sheets was verified with XPS, UV–vis absorption spectra, and SPFM, as shown in Figure 1. The sample labels and the

• XPS peak magnitudes for carbon atoms bonded to oxygen have decreased, indicating that most of the oxygen groups have been removed [8][9][20]. From the XPS data, we observed an increase in the ratio of the carbon atoms in aromatic rings (C=C/C–C) to those bonded to oxygen after the chemical reduction

• 0 < sample 1 ≈ sample 2 < sample 3 ≈ sample 4 < sample 5, which is almost consistent with the quantitative results shown by the parabola opening values. Therefore, chemical reduction with hydrazine monohydrate can reach a higher degree of reduction than thermal reduction without inert atmosphere

Nanoscale mapping of dielectric properties based on surface adhesion force measurements

• Ying Wang,
• Yue Shen,
• Xingya Wang,
• Zhiwei Shen,
• Bin Li,
• Jun Hu and
• Yi Zhang

Beilstein J. Nanotechnol. 2018, 9, 900–906, doi:10.3762/bjnano.9.84

• Sample preparation An aqueous solution of single-layered GO sheets was prepared from graphite powder following a modified Hummer’s method [47][48][49]. A drop of 10 µL of as-prepared GO solution (50 ng/µL) was placed onto a mica substrate. Chemical reduction of GO was performed by exposure to a saturated

Facile chemical routes to mesoporous silver substrates for SERS analysis

• Elina A. Tastekova,
• Alexander Y. Polyakov,
• Anastasia E. Goldt,
• Alexander V. Sidorov,
• Alexandra A. Oshmyanskaya,
• Irina V. Sukhorukova,
• Dmitry V. Shtansky,
• Wolgang Grünert and
• Anastasia V. Grigorieva

Beilstein J. Nanotechnol. 2018, 9, 880–889, doi:10.3762/bjnano.9.82

• )-active substrates. An analogous procedure was successfully performed for the production of mesoporous silver films by chemical reduction of oxidized silver films. The sponge-like silver blocks with high surface area and the in-situ-prepared mesoporous silver films are efficient as both analyte adsorbents

• is also in concordance with XRD analysis, which revealed no reflections of crystalline Ag2O after reduction by ten-fold excess of NaBH4 (Figure 1e). The similar chemical reduction procedure was applied then for mesoporous Ag film formation. The primary silver film with an estimated thickness of 150

• special chemical reduction method led to the easy scaling of uniform mesoporous silver films. These uniform mesoporous silver films served as SERS substrates and demonstrated a detection limit below 10−8 M for the same standard probe of R6G. The nanostructured silver films, obtained by an easy chemical

Tuning adhesion forces between functionalized gold colloidal nanoparticles and silicon AFM tips: role of ligands and capillary forces

• Sven Oras,
• Sergei Vlassov,
• Marta Berholts,
• Rünno Lõhmus and
• Karine Mougin

Beilstein J. Nanotechnol. 2018, 9, 660–670, doi:10.3762/bjnano.9.61

• force microscopy in ambient conditions. Au NPs were synthesized by chemical reduction of metal salts and functionalized with thiols presenting different tail groups varying from a very hydrophobic to a highly hydrophilic behavior. The tail groups were either an amino (–NH2), hydroxy (–OH), carboxyl

Co-reductive fabrication of carbon nanodots with high quantum yield for bioimaging of bacteria

• Jiajun Wang,
• Xia Liu,
• Gesmi Milcovich,
• Tzu-Yu Chen,
• Edel Durack,
• Sarah Mallen,
• Yongming Ruan,
• Xuexiang Weng and
• Sarah P. Hudson

Beilstein J. Nanotechnol. 2018, 9, 137–145, doi:10.3762/bjnano.9.16

• , Ireland School of Chemistry, University of Birmingham, Edgbaston, Birmingham B15 2TT, UK 10.3762/bjnano.9.16 Abstract A simple and straightforward synthetic approach for carbon nanodots (C-dots) is proposed. The strategy is based on a one-step hydrothermal chemical reduction with thiourea and urea

• ], significant progress in increasing the QY has been achieved. Most of the mentioned methods refer to surface passivation [9][10][11] and doping [12][13]. Recently, chemical reduction was also reported as an effective method to enhance the QY of C-dots [14]. Zheng et al. found an increase in QY for C-dots from

• value (45%) using citric acid and urea as precursors via a facile hydrothermal method. They evidenced that surface passivation by urea resulted in the high QY of the C-dots. Herein we report a C-dot synthetic procedure with remarkable QY (37%) by a one-step hydrothermal chemical reduction method, where

Bi-layer sandwich film for antibacterial catheters

• Gerhard Franz,
• Florian Schamberger,
• Hamideh Heidari Zare,
• Sara Felicitas Bröskamp and
• Dieter Jocham

Beilstein J. Nanotechnol. 2017, 8, 1982–2001, doi:10.3762/bjnano.8.199

• [24]. Colloidal silver can be prepared by electrolytical or chemical reduction of a silver salt solution and consists of positively charged silver clusters exhibiting a diameter of typically between 5 and 15 nm and, containing approx. 103 to 109 atoms/cluster. From the generation process, it is

Methionine-mediated synthesis of magnetic nanoparticles and functionalization with gold quantum dots for theranostic applications

• Arūnas Jagminas,
• Agnė Mikalauskaitė,
• Vitalijus Karabanovas and
• Jūrate Vaičiūnienė

Beilstein J. Nanotechnol. 2017, 8, 1734–1741, doi:10.3762/bjnano.8.174

• chemical reduction of HAuCl4. Briefly, 3.5 mL of NP solution was diluted to 5 mL under ultrasonic agitation for 10 min and 2.0 mL of HAuCl4 (10 mmol·L−1) was introduced into the reaction medium under ultrasound agitation. The solution was alkalized to the required pH value by addition of 2.0 mol·L−1 NaOH